Strong self-adhesive flashing tape with a natural lead-look finish comprising of an aluminium foil and a bitumen rubber adhesive.
The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.
Cut to the required length. Peel beck approximately 5cm of release carrier and place the tape into position. Continue removing the release carrier whilst firmly placing the tape to avoid unnecessary creasing. Ensure intimate contact and that no air is trapped. Using a small roller ensure that all edges and overlaps are sealed properly. Overlaps should be at least 25mm.
1 x 50mmx10mx1.5mm Flashband TAPE Self Adhesive Flashing Tape